1014 Matrix PRASAR UCS System Manual
• Priority Ring will be played only if the Extended Phone is SPARSH VP248.
• Priority is relevant only when there is more than one call on the destination.
• When there are multiple incoming calls, the call with the highest priority will be displayed first on the
Operator’s screen
How to configure
To assign Priority to Trunks, you must set the priority in their “Trunk Feature Template”. See “Configuring Trunks”.
To assign Priority to Extensions, see instructions for configuring the respective Extension port type:
• “Configuring SIP Extensions”
• “Virtual Extension”
If required, you may change the Ring Pattern of the Priority Ring. See “Distinctive Rings” for instructions.
To Next Page
Loading...