Matrix PRASAR UCS - Page 1114

Matrix PRASAR UCS System Manual 1105
The PRASAR UCS will make 5 attempts (default value of Data Transfer Retry Count - on Negative Response)
to send the message after a regular interval of 3 seconds (default value of Data Transfer Retry Timer - on
Negative Response). If the ACK is still not received from the CAS, the PRASAR UCS will proceed to the next
message.
• No Response from the CAS
The PRASAR UCS will make 5 attempts (default value of Data Transfer Retry Count - on No Response) to
send the message after a regular interval of 3 seconds (default value of Data Transfer Retry Timer - on No
Response). If the ACK is still not received from the CAS, the PRASAR UCS send the new message to CAS.
Blind Send
If you select this protocol as the SMDR-OG Posting Protocol, PRASAR UCS sends the call details without waiting
for any response from the CAS. Each record is sent with the End of Packet Character.
Customized
If you select this protocol as the SMDR-OG Posting Protocol, PRASAR UCS provides you the flexibility to set the
values for the OG Handshaking Protocol and the OG Online Call Record Format as per your requirement.
Call Detail Record Formats
The default Call Detail Record formats for Blind Send and Matrix are given below.
PRASAR UCS to CAS CAS to PRASAR UCS
<STX> -Call Record-<ETX> <BCC> and wait for Response
to Data Timeout (sec), default 3 sec.
(no response)
Retransmit <STX> -Call Record-<ETX> <BCC> and wait for
Data Transfer Retry Timer (sec) - on No Response, default
3 seconds.
Retransmit <STX> -Call Record-<ETX> <BCC> and wait for
Data Transfer Retry Timer (sec) - on No Response, default
3 seconds.
Retransmit <STX> -Call Record-<ETX> <BCC> and wait for
Data Transfer Retry Timer (sec) - on No Response, default
3 seconds.
Retransmit <STX> -Call Record-<ETX> <BCC> and wait for
Data Transfer Retry Timer (sec) - on No Response, default
3 seconds.