Matrix PRASAR UCS - Page 1155

1146 Matrix PRASAR UCS System Manual
Alarm
• Click Alarm to expand.
• Configure the following Alarm and Reminder parameters:
• Use Alarm with snooze: Enable this check box if you want to use the Snooze function for the Alarm
Call.
• Alarm Ring Timer (Sec): You may change the time for which the Alarm Call will ring on the extension
phone and the time for which the Operator phone will ring to notify an unanswered Alarm Call.
• Number of Alarm Attempts: You may increase or decrease the number of attempts the system should
make to serve an Alarm call.
• Alarm Attempt Interval (minutes): You may increase or decrease the time gap between each attempt
the system makes to serve an Alarm call.
• Configurable Alarm Type (Once Only/Daily): Disable this check box, if you do not want the system to
provide the Operator and the extension users the option of setting 'Once Only' or 'Daily' Alarms. When
this check box is disabled, the system will allow only 'Once Only' alarms to be set.
• Configurable Alarm Category (Personalized/Automated): Disable this check box, if you do not want
the system to provide the Operator the option of setting 'Personalized' or 'Automated' Alarm calls.
When this check box is disabled, the system will follow the 'Automated' Alarm call serving mechanism.
The Operator will not be prompted to choose between 'Automated' and 'Personalized' Alarm calls when
setting Alarm calls for an extension phone.
• Voice Guided Alarm Verification: Enable this check box if you want to enable extension users to
confirm the Time they have set for an alarm or the Date and Time they have set for a reminder.