Matrix PRASAR UCS System Manual 1191
• Landing Destination: Configure the Port Type and Port Number on which you want the Virtual
Extension user to receive incoming calls.
• Priority: Select a Priority Level for the Virtual Extension.
Each extension of the PRASAR UCS is assigned a Priority Level starting from 1, 2, 3... to 9, with '1'
being lowest Priority and '9' being highest Priority. Whenever an extension phone with higher priority
calls an extension with lower priority, a triple ring is placed on the called station. To know more, read the
feature description “Priority”.
By default, the Priority of all Virtual Extensions is set to '1-None'. So, decide what Priority Level you will
assign to each of the Virtual Extensions and set the desired level for each extension.
Advanced Configuration Parameters
• Click the Advanced button at the bottom of the page and configure the following parameters:
• Mobile Number: Enter the Mobile Number of the extension user you wish to store. The Number can be
a maximum of 16 digits.
• Email ID: Enter the Email ID of the extension user you wish to store. The Email ID can be a maximum
of 64 characters.
• If you have completed configuring the parameters, click Submit at the bottom of the page to save your
settings.
It is possible to default all the parameters by clicking the Default button. You can also restore default
values of the parameters of a single Virtual Extension by clicking the Default One button and specifying
the Virtual Extension Number you want to set to default.
• Click Submit.
To Next Page
Loading...