Matrix PRASAR UCS System Manual 1195
• Dial your extension number.
• You get the prompt 'Enter your User Password'.
• Dial your User Password (default password will not be accepted).
• You get the confirmation message 'Walked In Successfully' on the phone’s display and a confirmation tone.
• You can now make your call(s) or access a feature.
To perform a Walk-Out, on the Destination Extension or on the Source Extension,
• Press DSS Key assigned to Walk-In Class of Service.
OR
• Dial 111.
• Select 'Walk-Out’ on your phone's display.
• You get the confirmation message 'Walked Out' on your phone's display and confirmation tone.
You need to perform a Walk-Out only if the Source Extension as Multiple Calls set as Walk-Out mode.
If the Source Extension has 'One Call’ set as the Walk-Out mode, you will be walked out of the Destination
Extension when you go ON-Hook after making a call or accessing a feature.
If the extension you are walking in has 'One Call’ as the Walk-Out mode, and you go ON-Hook before you
make the call, you will be 'Walked Out'. You must Walk-In again.
To Next Page
Loading...