Matrix PRASAR UCS System Manual 1199
How to configure
The VMS allows you to enable/disable the Alarm Verification for alarms and reminders, allowing extension users
who want to use alarms and reminders to confirm
• Time set for an alarm
• Date and time set as a reminder.
When Alarm Verification is disabled, the VMS will not confirm the alarm and reminder set by the extension user.
If you want the VMS prompts to be played when the extension users answer an Alarm Call/Reminder Call and
acknowledge it, make sure you have selected Voice Mail as Alarm Notification Type.
To configure Alarm Verification,
• Login as System Engineer.
• Under Configuration, click System Parameters.
• On the System Parameters page, click Alarm to expand.
• Select the Voice Guided Alarm Verification check box to enable extension users to confirm the Time
they have set for an alarm or the Date and Time they have set for a reminder. Default: Enabled.
• Click Submit.
To configure Alarm Notification Type,
• Under Configuration, click Station Advanced Feature Template to open the page.
• Click Alarm Notification to expand. Select the Alarm Notiifcation Type as Voice Mail.
• Click Submit.
• Assign this Station Advanced Feature Template to the desired extensions.
To Next Page
Loading...