Matrix PRASAR UCS - Page 1210

Matrix PRASAR UCS System Manual 1201
• If no time is entered, the VMS prompts: "You have not entered any input"
• If invalid time is entered, the VMS prompts: "You have entered invalid input."
• To set alarm, dial valid time  VMS prompts: "To set once, Press '1', To set Daily Press '2'.”
Once Only
•Dial 1  the VMS responds with: "To set it as Personal, Press 1. To set it as Automated, Press 2."
• Dial 1  VMS responds with: "You have set Personal Wake up alarm at…." followed by the prompt: "To
Confirm, Press 1, To Re-enter, Press 2."
• Dial 1  VMS responds with: "Your Personal Wake up Alarm is set." followed by the prompt: "Thanks
for using this Service."
• If alarm is not set, the VMS responds with: "Sorry! Your Wakeup Alarm cannot be set. Please call
Operator for further assistance." VMS further responds with: "Thanks for using this Service."
OR
• Dial 2  the VMS responds with: "You have set Automated Wake up alarm at…." followed by the
prompt: "To Confirm, Press 1, To Re-enter, Press 2."
• Dial 1  the VMS responds with: "Your Automated Wake up Alarm is set." followed by the prompt:
"Thanks for using this Service."
• If alarm is not set, VMS responds with: "Sorry! Your Wakeup Alarm cannot be set. Please call
Operator for further assistance." VMS further responds with: "Thanks for using this Service."
Daily Alarm
•Dial 2  VMS responds with: "To set it as Personal, Press 1. To set it as Automated, Press 2."
• Dial 1  VMS responds with: "You have set Daily Personal Wake up alarm at…." followed by the
prompt: "To Confirm, Press 1, To Re-enter, Press 2."
• Dial 1  VMS responds with: "Your Daily Personal Wake up Alarm is set." followed by the prompt:
"Thanks for using this Service."
• If the alarm is not set, the VMS responds with: "Sorry! Your Wakeup Alarm cannot be set. Please
call Operator for further assistance." VMS further responds with: "Thanks for using this Service."
OR
• Dial 2  the VMS responds with: "You have set Daily Automated Wake up alarm at…." followed by the
prompt: "To Confirm, Press 1, To Re-enter, Press 2."
• Dial 1  VMS responds with: "Your Daily Automated Wake up Alarm is set." followed by the prompt:
"Thanks for using this Service."
• If alarm is not set, VMS responds with: "Sorry! Your Wakeup Alarm cannot be set. Please call Operator
for further assistance." VMS further responds with: "Thanks for using this Service."