Matrix PRASAR UCS System Manual 117
• Redundancy on: This displays the port through which redundancy occurs and the WAN/LAN IP address
of the Active system and Standby system.
• Redundancy Status: This displays:
• Green dot when redundancy is aptly configured and Backup Server is in synchronization.
• Red dot when the two systems are disconnected.
• Orange dot when the system is in Standby state.
• Call Manager - Synchronization, Session Manager - Synchronization, Heartbeat: When there is any
problem during the synchronization, the respective status will be displayed.
The Redundancy status is also displayed in the top banner,
• It displays the current Server Mode — Primary or Backup and the Status — Active or Standby depending
upon the availability of the server.
To Next Page
Loading...