Matrix PRASAR UCS - Page 1273

1264 Matrix PRASAR UCS System Manual
• The Network Parameters submenu appears.
• Scroll with the DOWN navigation key to PCAP and press Enter key.
• The message Stop PCAP appears on your phone display.
• Press Enter key. You get the confirmation message: ‘Stopped!’
• Go idle.
You can download the Trace file from the embedded FTP server of the Extended IP Phone. To access the FTP
server using Windows FTP, do the following:
•Go to My Computer.
• Type the current IP Address of the Extended IP Phone in the Address bar. For example: ftp://
192.168.201.134
• Click Go or Press Enter key on your keyboard.
• The Log on as window of the FTP server opens.
•In User Name, type se (lower case).
•In Password, enter the FTP Password for the phone.
• Click Log on.
• On successful login, the FTP window will open. You will see the different Configuration folders in this
window.
• Click the folder ramdisk.
• In the ramdisk folder, right click the file trace.pcap and copy it on to your local disk.
• Open the trace.pcap file using Wireshark or Ethereal or any other similar software which supports
opening of trace files.