Matrix PRASAR UCS System Manual 1267
If you have selected Traceroute as the Diagnostic Utility option, configure the following parameters:
•In Traceroute Max TTL, enter the maximum number of hops (Time-To-Live value) you want the system
to take in the path to find the IP Address configured. Valid Range: 1 to 255. Default: 30.
•In Traceroute Protocol, select the protocol — ICMP or UDP — which you want the system to use for
traceroute functionality.
• To start the Network Diagnosis, click Start button.
The Diagnostic result will appear on the screen.
• To clear the Diagnostic result, click Clear button.
To know about the Connectivity between the third party server and PRASAR UCS system, refer to “Apple Push
Notification Service Support” and “Firebase Cloud Messaging (FCM) Support”.
To Next Page
Loading...