Matrix PRASAR UCS System Manual 1273
•File IO
• Extended Client Info
•Maturity
• RCOC
• Web Jeeves
• Notification
Applications
• Media Server
• Session Manager
•VMS
Redundancy
• Redundancy Process
• Configuration File
• Communication Process
•Call
• Feature
• Phone
•RTC
As per the level selected, debug log will be generated.
• If required you can also enable the Call Manager Layer.
• Select the Debug check box to enable.
• Configure Syslog Server IP Address and Port.
Both IPv4 and IPv6 addresses are supported. By default, the Port is 514. Valid range of the port is
from 1025 to 65535 and 514.
• Click Submit.
We recommend you to consult the Matrix support team before you enable debugs. These debugs lead to
debug data streaming in huge quantities which may affect the system performance.
To Next Page
Loading...