Matrix PRASAR UCS - Page 1298

Matrix PRASAR UCS System Manual 1289
Physical Features of SPARSH VP110
This section lists the available physical features of SPARSH VP110 IP phones.
• 132 x 64 Graphic LCD
• Single VoIP account
• 29 keys including 4 soft keys
• 1 x RJ9 (4P4C) Handset port
• 1 x RJ9 (4P4C) Headset port
• 2 x RJ45 10/100Mbps Ethernet ports
• 1 LED: 1 x Power
• Power Adapter (Optional): AC 100~240V input and DC 5V/600mA output
• Power over Ethernet (IEEE 802.3af)
SIP
9 Multiple SIP Accounts
Out Bound Proxy Support
Main and Secondary DNS Server Support
NAT STUN and NAT Keep Alive
Voice CODECS
G.722 Wideband, G.711 A/µ-Law, G.723-5.3, G.723-
6.3, G.726-16, G.726-24, G.726-32, G.726-40,
G.729AB
Call Progress Tones
Dial Tone, Ring Back Tone, Busy Tone, Error Tone,
Waiting Tone
Voice
Dynamic Jitter Buffer (Adaptive), Comfort Noise
Generation and Voice Activity Detection
Quality of Service Layer 3 DIFFServ and TOS
Data Network
LAN Port (RJ45), 10/100 Base T (PoE Optional)
PC Port (RJ45), 10/100 Base T
Security Password Protected Administration
Power Supply
Input
5VDC @2A through External Adaptor
(90-265VAC, 47-63Hz)
Power-over-Ethernet (PoE)
Power Consumption 5W (Typical)
Mechanical
Dimensions (WxHxD) 24.0 x 20.0 x 9.9 cm (9.4”x7.9”x3.9”)
Material ABS Plastic
Installation Mounting Wall Mount and Table-Top
Environmental
Operating Temperature 0°C to 45°C