160 Matrix PRASAR UCS System Manual
• If you select this option, you must configure the SRTP Media Type. You may select AVP or SAVP.
By default, AVP is selected as the SRTP Media Type.
• Forced: PRASAR UCS uses only SRTP (SAVP) for transporting the speech packets. If the remote
user does not support SRTP, PRASAR UCS will reject incoming calls from and drop outgoing calls
made to such users.
By default, SRTP Mode is Disabled.
• Assign a SIP Hardware Template to the SIP Extension. Default: 01. The “SIP Hardware Template”
contains voice quality related features such as Voice Codec selection, Tx and Rx Gains, Echo
Cancellation, Jitter Buffer and Fax-over-IP options and related parameters
There are 32 different templates to choose from. Each template can also be altered to suit your
requirement and preferences. By default, Template number 01 assigned to all SIP Extensions as well as to
SIP Trunks.
Check if the values in this template fulfill requirements of the SIP Extension. If Template 01 fulfills the
feature requirements, retain Template 01.
If a different set of SIP hardware features are to be allowed to this SIP Extensions, prepare another
template and assign it to this extension. To do this,
• Under VoIP Configuration, click the SIP Hardware Template link.
• Select a Template number, for example 02.
• Customize Template number 02 and click Submit.
• Return to the SIP Extension Settings page.
• Select the number of the Template you customized, Template 02 in the SIP Hardware Template
field.
Also see the topic “SIP Hardware Template” to know more about customizing the templates and
applying on the SIP Extensions.
• Assign a Station Basic Feature Template to the SIP Extension. Default:01. The “Station Basic
Feature Template” has a set of features like Time Table, Class of Service, Toll Control, Operator,
Storage of Incoming and Outgoing Calls, Outgoing Trunk Bundle groups. There are 50 different
templates to choose from. Each template can also be altered to suit your requirement and preferences.
If the default Station Basic Feature Template 01 fulfills the feature requirements of the SIP Extension
(“Class of Service (COS)”, “Toll Control”, “OG Trunk Bundle Group”, etc.) retain this template, you may
also customize this template. If you want to assign a different set of features to this SIP Extension,
prepare a different Station Basic Feature Template and apply it to this extension. To do this,
• Under Configuration, click the Station Basic Feature Template link.
• Select a Template number, for example 05.
• Customize Template number 05 and click Submit.
• Return to the SIP Extension Settings page.
To Next Page
Loading...