Matrix PRASAR UCS System Manual 255
Similarly, you can configure the parameters listed in Location 2 and 3 as per your requirement.
Generating CSV File
After you have configured the required parameters in the CSV Generator Template, you can now generate the CSV
File. To do so,
• Click the Generate csv button present at the bottom of the CSV Generator Template.
• A pop window opens specifying the number of extensions that are created successfully.
• Click OK.
External Registrar Server
Address
Select the appropriate External Registrar Server Address to register the
UC clients (VARTA ADR100/ VARTA AMP100) with the SIP Registrar
of PRASAR UCS from a public network.
Select the option according to your installation scenario:
If you want the UC clients to register using the WAN network, select
Use WAN Port IP Address as the External Registrar Server Address.
If the UC clients is connected in the Public Network and PRASAR UCS
is located behind a Router, or behind a NAT Router and STUN is
configured, select Use Router/STUN's IP Address as External
Registrar Server Address. Make sure you configure either the Router’s
Public IP Address or Simple Traversal of UDPs through NATs (STUN)
in Network Parameters. For details, see “Configuring Network
Parameters”.
If Dynamic DNS is configured in the Network Parameters, select Use
Dynamic DNS Host Name as the External Registrar Server Address.
By default, Use WAN Port IP Address is selected as the External
Registrar Server Address.
Location 1 Description
To Next Page
Loading...