268 Matrix PRASAR UCS System Manual
Configuring SIP Extension Settings using Jeeves
• Login as System Engineer.
• Under Configuration, click VoIP Configuration.
• Click SIP Extension Settings.
The page of SIP Extension 1 opens.
• You may select the SIP Extension number you want to configure.
The parameters of the SIP Extension number you selected will appear on this page.
For PRASAR UCS up to 2100
49
SIP Extensions can be registered with the system. PRASAR UCS supports
IPv4 and IPv6 Addresses for registering Standard SIP Phones.
• Select the Use SIP Extension check box to enable the SIP extension. Default: disabled.
•In Name, enter a name for the SIP Extension, which may be the name of the person who will use the SIP
Extension or the name of a Department. The name you enter here will be displayed as the Caller ID of the
SIP Extension on the remote user's phone, when the SIP Extension user makes calls.
The name may consist of a maximum of 18 alphanumeric characters.
If no name is assigned to the SIP Extension, the system will display the name received in the INVITE
message from the SIP Extension user when making outgoing calls.
• Enter the SIP ID for the extension. The SIP ID is necessary for registering the SIP Extension with the
Registrar of the system. It is the number with which you can call the SIP Extension. Any extension user of
49. PRASAR UCS SME Application supports 250 SIP Extensions.
To Next Page
Loading...