Matrix PRASAR UCS System Manual 349
Customizing SIP Hardware Template
You can customize 32 SIP Hardware Templates using Jeeves By default, SIP Hardware Template 01 is assigned
to all SIP Trunks as well as SIP Extensions.
If the default SIP Hardware Template 01 fulfills the user requirements, retain Template 01. If you want to change
the values of certain SIP Hardware Parameters, but apply the same parameter values to all SIP Trunks and
Extensions, simply customize the desired parameters in Template 01.
If different hardware parameters are to be applied to different SIP Trunks and SIP Extensions, customize different
SIP Hardware Templates and apply them to the SIP Trunks and SIP Extensions as appropriate.
Customizing SIP Hardware Template using Jeeves
• Login as System Engineer.
• Under Configuration, click VoIP Configuration.
• Click SIP Hardware Template.
• Select a Template number you wish to customize, for example Template 02.
• Change the values of the SIP Hardware Template parameters as desired.
• Click Submit to save your changes.
• Now, apply this Template 02 on the SIP Trunks and SIP Extensions.
To apply the customized template on SIP Trunks,
• Under VoIP Configuration, click SIP Trunk Parameters.
• Select the desired SIP Trunk No to which this Template is to be assigned, for example SIP Trunk 02, 03
and 04.
• Click Others to expand. Enter the number of the Template you customized, 02, in SIP Hardware
Template of each of these SIP Trunks.
• Click Submit to save your template.
To apply the customized template on SIP Extensions,
To Next Page
Loading...