Matrix PRASAR UCS - Page 394

Matrix PRASAR UCS System Manual 385
• If you have finished defining the time zones, entering the number strings, and selecting the preferred
trunks for the number strings, configure the Number and Time-based LCR using Jeeves.
Configuring Time+Number-based LCR using Jeeves
• Login as System Engineer.
• Under Configuration, click Least Cost Routing (LCR).
• Click Time + Number based.
• Enter the values of the Time+Number-based LCR you prepared on the sheet of paper in the appropriate
fields.
• Click Submit.
99
Time Zone1 Time Zone2 Time Zone3 :
Time
Zone
8
HH MM HH MM HH MM
Start Time
08 00 12 00 09 00
End Time 12 00 18 00 20 00
Cost Factor Cost Factor Cost Factor
Index
Number
Prefe
rence
1
Prefe
rence
2
Prefe
rence
3
Prefere
nce 4
Prefe
rence
1
Prefe
rence
2
Prefe
rence
3
Prefere
nce 4
Prefe
rence
1
Prefe
rence
2
Prefe
rence
3
Prefere
nce 4