Matrix PRASAR UCS System Manual 395
Each Number is stored at an index from 01 to 10. The Emergency Number fields from index 01 to 5 are non-
editable, but you can select a different OGTBG for each of these default Emergency Numbers.
You can add Emergency Numbers at index 06 to 10 in the table, and select the OGTBG as required.
Configuring Emergency Number Table using Jeeves
• Login as System Engineer.
• After you have selected the Region.
• Under Configuration, click Emergency.
• Click Emergency Number.
Click the Default button, the system will upload the default Emergency Numbers as per the Region you
have selected.
The first five entries, at Index 01 to 05 on this table, are un-editable. These fields will be populated with the
default Emergency Numbers of your country (which you selected as Region).
If the Emergency Numbers loaded by default are applicable for your region/country, all you need to do is
re-assign, if required, the Outgoing Trunk Bundle Group assigned by default to each number.
06 01
07 01
08 01
09 01
10 01
Index Emergency Numbers OG Trunk Bundle Group
To Next Page
Loading...