EasyManua.ls Logo

Matrix PRASAR UCS - Page 411

Matrix PRASAR UCS
1368 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
402 Matrix PRASAR UCS System Manual
While selecting the Filename format, make sure:
None is not selected as the first two options.
Date and Time are included in the filename.
The same option (other than None) is not selected twice.
The table given below defines the parameters. You may sequence it as per your requirement.
The default sequential Filename Format is as given below:
For Mailbox (Personal): Date-Time-Message Type-Calling Number-Called Number.wav
For General Mailbox:
Mailbox Extension Number-Date-Time-Message Type-Calling Number-Called
Number.wav
Option Meaning
None
The system will skip this option and move to the next option configured.
Date
Select this option if you want the system to add the Date
a
in the filename.
a. The Date Format here will be as per the Date Format you have selected in General Settings.
Time
Select this option if you want the system to add the Time
b
in the filename.
b. The Time Format here will be as per the Time Format you have selected in General Settings.
Message Type
Select this option if you want the system to add the Message Type
c
for the
message stored.
c. The Message Types supported by the system are: Call forward (CF), Call Taping (CT), Conversation
Recording (CR), Broadcast Message (BM), Transfer to Mailbox (TM), Leave Message (LM), Send Message
(SM), Call forward with LCS – No reply, all (LS), Redirect Message (RM), Message forward (MF).
Calling Number
Select this option if you want the system to add the calling number. If calling
number is Blank, the system will add ‘No Number’.
Called Number
Select this option if you want the system to add the called number. If Called
number is not available, system will ignore this option and select the next
option. This option is generally required when you wish to use the feature Call
Tapping.
Mailbox Extension Number
This option is applicable only for General Mailbox. Select this option if you want
the system to add the mailbox extension number from which the message is
transferred to the General Mailbox.

Table of Contents

Other manuals for Matrix PRASAR UCS