EasyManua.ls Logo

Matrix PRASAR UCS - Page 46

Matrix PRASAR UCS
1368 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Matrix PRASAR UCS System Manual 37
So, the person installing or servicing the system must provide a path to the static charges, by wearing an
antistatic belt, which is properly earthed.
Shock and Fire Hazard
Always wear a properly earthed, electrostatic discharge preventive wrist strap/belt while handling the
system to prevent damage to the system and harm to yourself.
Do not open the system in power On condition.
The ventilation openings on the sides of the product’s enclosure must not be blocked or covered to prevent
overheating.
Never insert or push objects of any kind into this product through the slots as they may touch dangerous
voltage points or short out parts which may result in fire or electric shock.
This product is equipped with a plug having a third (ground) pin, which fits only into a grounding-type
outlet. This is a safety feature. So, if the existing outlet is not a three-pin and or if you are unable to insert
the plug into the outlet, have the outlet replaced by the electrician.
Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock.
Do not disassemble this product. Opening or removing covers may expose you to dangerous voltages or
other risks. Incorrect reassembly may cause electric shock when the appliance is used. Take the product
to a qualified technician when service or repair work is required.
Avoid using a telephone (other than a cordless type) during a storm, to prevent electric shock from
lightning.
Do not use the telephone to report a gas leak in the vicinity of the leak so as to prevent the risk of fire.
External Devices
When you connect external devices like headset, telephone instruments, cables, connectors, etc., ensure
that they are of standard make and good quality, so that the functioning of the system is not affected.
Matrix does not guarantee the performance of external devices that are not supplied by it.
Cleaning and maintenance
Switch off power supply, and unplug the product from the power outlet before you clean.
Do not use liquid cleaners or aerosol cleaners.
Use a dry cloth for cleaning.

Table of Contents

Other manuals for Matrix PRASAR UCS