Matrix PRASAR UCS System Manual 469
•In Operator Group, select the desired Operator Group Number. Make sure you have configured the
parameters for this group. For detailed instructions, see “Extension Voice Mail Settings”. By default, As
Configured in Extension Settings is selected, that is, the system will use the Operator Group configured for
the Transfer Number.
•In Call Transfer Profile, select the desired Call Transfer Profile as per your requirement. By default, As
Configured for Transfer Number is selected.
Click Settings to configure the parameters of the selected profile.
Transfer to Assistant
If you assign a digit for this option, make sure you have programmed the Assistant Number. For detailed
instructions, refer “Number Programming (Assistant/Personal)” in “Mailbox Menu”.
Click Settings to configure the parameter.
•In Call Transfer Profile, select the desired Call Transfer Profile you want the system to use. Make sure
you have configured the parameters for this profile. By default, Wait for Ring is selected, that is, the system
will use the Call Transfer profile configured for transfer number.
•In Call Transfer Profile, select the desired Call Transfer Profile as per your requirement. By default,
Wait for Ring is selected.
Click Settings to configure the parameters of the selected profile.
Transfer to Alternate/Mobile Number
If you assign a digit for this option, make sure you have programmed the Alternate/Mobile Number. For detailed
instructions, refer “Number Programming (Assistant/Personal)” in “Mailbox Menu”.
Dial Extension Number
After you assign the digit, click Settings to configure the parameters.
To Next Page
Loading...