514 Matrix PRASAR UCS System Manual
The system supports following VMS Debug Levels. You may select the respective checkbox of the debug levels
you wish to include in the VMS Debug.
• Select the Call check box to view the debug for all types of call flow.
• Select the Mailbox check box to view the debug for all operations related to Mailbox.
• Select the SMTP check box to view the debug related to the SMTP Client handled by VMS.
• Select the Error check box to view the debug for all types of errors.
• Select the Configuration check box to view the debug for configuration update.
• Select the Common check box to view the debug
• Select the Play check box to view the debug related to play from VMS application as well as layer side.
• Select the Record check box to view the debug related to the records from VMS application as well as
layer side.
Protocol
• Select the Basic check box to view the debug for data received with its IE.
• Select the Extended check box to view the debug for data received in raw hex format.
• Click Submit.
You can also configure the VMS Debug from the Maintenance link. To do so, click VMS under Debug.
To Next Page
Loading...