Matrix PRASAR UCS - Page 587

578 Matrix PRASAR UCS System Manual
Configuring Auto Answer using Jeeves
To configure auto answer for Extended IP Phones, see “Configuring Matrix SPARSH VP248” and “Configuring
Matrix SPARSH VP310”.
How to use
Extension users can set/cancel Auto Answer and enable Headset connectivity from their Extended IP Phone or by
navigating the Phone Menu.
To set Auto Answer:
• Press the DSS Key assigned to Auto Answer
84
.
OR
• Press 'Enter' Key.
• Scroll down to select 'Phone Settings'; press Enter Key.
• Enter Your User Password (default: 1111).
• Scroll down to select 'Call Answer Type'; press Enter Key.
• You get the options:
Manual Call Answer
Auto Call Answer
• Scroll to select Auto Answer and press Enter key.
• Now select the Timer for Auto Answer from any of the options:
Answer After 1 sec (default)
Answer After 2 sec
:
Answer After 9 sec
• Press Enter Key.
To cancel Auto Answer:
• Repeat the above steps.
• Select 'Manual Answer' as the Call Answer Type.
It is recommended that Auto Answer Timer be set to at least 2 seconds.
To enable Headset Connectivity:
• Press the DSS Key assigned to Headset function
85
.
OR
• Press 'Enter' Key.
• Scroll down to select 'Phone Settings'; press Enter Key.
• Enter Your User Password (default: 1111).s
• Scroll down to select 'Headset Connectivity'; press Enter Key.
• You get the options:
84. This function must have been programmed by the System Engineer on a DSS Key of the phone. Refer “DSS Keys Programming”-
for instructions.
85. This function must have been programmed by the System Engineer on a DSS Key of the phone. Refer “DSS Keys Programming”-
for instructions.