582 Matrix PRASAR UCS System Manual
• Scroll to Other Features.
• Set the Auto Call Back Ring Timer (sec) to the desired duration.
• Click Submit.
How to use
Extension users can set two types of Auto Call Back:
• Auto Call Back on Busy - when the extension/trunk they are trying is Busy.
• Auto Call Back on No Reply - when there is no reply from the extension they are trying.
Auto Call Back on Busy
For Extended IP Phone Users
Using DSS Key:
To set Auto Call Back on Busy:
• Press the Call Back' Key / DSS Key assigned to Auto Call Back on Busy Tone.
• You get confirmatory message "Auto Call Back Set" on the phone's display. The LED of the DSS Key will
be turned on.
• Go idle or you get dial tone after 3 seconds.
To cancel Auto Call Back on Busy:
• Press the Call Back' Key / DSS Key assigned to Auto Call Back again.
To Next Page
Loading...