52 Matrix PRASAR UCS System Manual
802.1x Authentication
If you want to restrict unauthorized clients from connecting to your LAN, you need to enable 802.1x Authentication.
Using EAP MD5 protocol the PC connected to the LAN port of the IP Phone is first authenticated and then it gets
connected to LAN.
You need to configure the following 802.1x Authentication parameters:
• Select Enable?.
• Enter the 802.1x Authentication Identity provided by you network administrator.
• Enter the 802.1x Authentication MD5 Password associated with identity provided by your network
administrator.
Viewing Network Status
• In the Local Menu of the phone, place the cursor on Network Status and press the Enter key.
• The Network Status submenu appears.
Use the Down/Up key to view the status of the various network parameters. The status of the following
parameters appear on your display as you scroll.
• MAC: This is the MAC Address of the phone.
• IP: The current IP Address assigned to the phone.
• MASK: The current Subnet mask assigned to the phone.
• GW: The current Gateway IP Address assigned to the phone.
• DNS: The Domain Name Server address assigned to the phone.
• S. ADD: The LAN or WAN IP Address / Domain Name of the PRASAR UCS.
•S. PORT: The SPARSH Port PRASAR UCS.
• DOMAIN: The Domain Name assigned to the phone.
• 802.1x Authentication: The 802.1x authentication status is displayed—Success, Failure,
Authenticating or Disabled.
• FIRM: The version of the current Firmware of the phone.
• UBOOT: The UBOOT release date.
NET WORK STATUS
MAC: 00:1b:09:00:9a:a7
IP: 192.168.201.205
MASK: 255.255.255.0
G W: 192.168.201.3
D N S :
To Next Page
Loading...