610 Matrix PRASAR UCS System Manual
• The PRASAR UCS will calculate cost of phone calls made by the trunks even when no call budget is
allocated
93
.
How to configure
Call Budget on Trunks is to be programmed in the SIP Trunk Parameters on which you want to enable this feature.
Programming Call Budget on Trunks using Jeeves
• Login as System Engineer.
• Call Budget parameters must be programmed in the SIP Trunk Port Parameters page you want to
configure. For instance, to configure Call Budget on a SIP Trunk,
• Under Configuration, click VoIP Configuration.
• Click SIP Trunk Parameters.
• Select the desired SIP Trunk number.
93. Based on the feature “Call Cost Calculation (CCC)”.
To Next Page
Loading...