620 Matrix PRASAR UCS System Manual
• Click Normal Pulse Rate Table.
• Configure the Pulse Rate Type with rates for the First Unit and the Additional Unit.
Generally service providers offer different call rates for different types of calls, for example: local, national,
international. You can configure different Pulse Rate Types for different types of calls. Thus, each Pulse
Rate Type can have different rates for the First and the Additional unit.
The Pulse Rates offered by service providers may vary according to the time of the day. In such cases, you
will need to configure the Call Cost Calculation Schedule for the trunk, by dividing the day into Time
Zones, from 1 to 4, as required, to match the time of the pulse rates offered by your service provider.
If you have configured Time Zones for the Call Cost Schedule on a trunk, you may define the different
Pulse Rate Types for each Time Zone.
• Click Submit.
To Next Page
Loading...