Matrix PRASAR UCS - Page 665

656 Matrix PRASAR UCS System Manual
OR
•Dial 13.
• Scroll to select Dual Ring.
• Press 'Enter' key.
• Select Dual Ring ON
• Press ‘Enter’ key.
• You get a confirmatory text message and confirmation tone.
• Go Idle or you get dial tone after 3 seconds.
• If the call is to be forwarded to an extension, dial the extension number.
• If the call is to be forwarded to an external number, dial Trunk Access Code, then the external phone
number and terminate the command with #*.
• For users world wide, Trunk Access Code (TAC) for dialing external numbers are: 0, 5, 61, 62, 63,
64.
• For users in USA, TAC for dialing external numbers are: 9, 5, 81, 82, 83, 84.
• If call is to be forwarded on voice mail, dial the Access Code for the Voice Mail System. The default
Access Code is 3931. Verify with the System Engineer if the default VMS Access Code has been
changed and use the new code to dial the VMS.
To cancel Call Forward,
• Press 'Forward' Key again.
OR
•Dial 13.
• Select 'Cancel'.
• You get a confirmatory text message and confirmation tone.
• Replace Handset on the cradle or you get dial tone after 3 seconds.