Matrix PRASAR UCS - Page 668

Matrix PRASAR UCS System Manual 659
• To forward calls of this extension to another extension, select Forward Calls to Phone and the type of
call forward. Default: Unconditionally.
Enter the extension number to which calls must be forwarded.
• To forward calls of this extension to an external number, select Forward Calls to External Number
and select the type of call forward. Default: Unconditionally.
Enter the external number to which calls must be forwarded.
By default, TAC 0 is assigned for routing external calls. You can change the TAC as per your
requirement.
• Click the Apply Call Forward button to set Call Forward.
The message “Call Forward is set” appears.
• Click the Dual Ring button to set Call-Forward Remote with Dual Ring.
The message “Dual ring is On” appears.
• To set Call Forward on another extension, follow the same instructions as above.
• You can also forward the calls of all extensions at one go to the same destination. To do this,
• Click Call Forward-All Extensions.
• Select the Forward Calls of all Extensions and select the Call Forward type.
•In to Extension, enter the Call Forward destination number.
• Click Submit.