Matrix PRASAR UCS - Page 717

708 Matrix PRASAR UCS System Manual
• Click General Settings to expand.
• Specify the location where you want to Save Call Taping Files in. You can save the Call Taping files
either in the Common Mailbox or in your Personal Mailbox. By default, Call Taping files are saved in the
Common Mailbox.
• If you choose to save Call Taping files in the Common Mailbox,
• enter the access code of the SIP Extension, Department Group or General Mailbox, whose mailbox
you want to assign for Call Taping in Common Mailbox for Call Taping (Enter Extension Number).
• select the type of file you want the system to generate for saving the taped conversation in Save Call
Tapping Files as. You may select — Individual File before and after call transfer or Single File before
and after call transfer as per your requirement.
If you select Individual File before and after call transfer, the system will generate two separate files for
saving the taped conversation, that is, one file containing the conversation taped before the call is
transferred and another file containing the conversation taped after the call is transferred. However, if
you select Single File before and after call transfer, the system will generate one single file for saving
the conversation taped before and after the call is transferred.
• Click Submit.
To enable/disable Call Taping Beeps,
• Under Configuration, click System Parameters.
• Click the System Parameters to expand.