736 Matrix PRASAR UCS System Manual
Assigning a CoS group in a Station Basic Feature Template using Jeeves
• Login as System Engineer.
• Under Configuration, click Station Basic Feature Template.
• Select the desired Template No.
• Click Class Of Service to expand.
• The default CoS group assigned to each time zone, that is, working hours (WH), break hours (BH) and
non-working hours (NH) appears under Class of Service.
• To assign a different CoS group to a Station Basic Feature Template, enter the CoS group number for
each time zone under Class of Service.
• Click Submit.
By default, Station Basic Feature Template 01 is applied on all extensions and CoS group 01 is the
assigned by default to this template in all time zones.
If all extensions to be allowed the same set of features during working hours, break hours, non-working
hours, enter the same CoS group number in all time zones in the Template Number applied to all
To Next Page
Loading...