Matrix PRASAR UCS - Page 779

770 Matrix PRASAR UCS System Manual
• Under Configuration, click System Parameters.
•Go to Play Beep when Raid/Call Taping/Conversation Recording starts. Click the check box to enable
or clear the check box to disable this feature.
• Click Submit.
How to use
For Extended IP Phone Users
To record a conversation:
• You are in speech with another extension/external number.
• Press DSS Key assigned to Conversation Recording (if programmed).
OR
Press Transfer Key and Dial 1095.
• You get beeps (if enabled).
• Speech with party re-established.
• Recording starts.
• Go ON-Hook, after conversation ends.
To listen to a recorded conversation:
• Press ‘Voice Mail’ Key
OR
Dial 3931
107
• Follow Voice Mail Prompts.
• Go Idle or you get dial tone after 3 seconds.
107. This is the default Voice Mail Feature Access Code. Verify with your System Engineer if this has been changed and use the new
code.