Matrix PRASAR UCS System Manual 71
You can configure Network Parameters and view Network status from the Local Menu.
Configuring Network Parameters
• In the Local Menu of the phone, select Network Parameters by pressing the Enter Key.
• The Network Parameters submenu appears.
• Use the Down/Up key to reach the desired network parameter and press Enter key to select. Change the
settings as per your requirements.
• Press Save key, to save the changes you make.
• You can configure all network parameters described below, except the MAC Address.
• To enter a dot in the editable fields — IP Address, Subnet Mask, Gateway Address, DNS Address,
Server Address — press
* (Star) key.
• If you want to clear a single digit/character, move the cursor to the right of the digit/character you wish
to clear. Now press the Delete key. The digit to the left of the cursor will be deleted.
Before you start configuring the Network Parameters, get acquainted with following context keys:
Connection Type
• Select the Connection Type as DHCP, PPPoE or Static according to the IP Addressing scheme of your
network.
Context Keys Description
Enter/OK To select a particular parameter
Save To save the changes
Back To move a step backwards without saving the changes
Delete To delete previous characters from the cursor position
2Ab/123
2Ab - Alphanumeric Mode
123 - Numeric Mode
To Next Page
Loading...