Matrix PRASAR UCS - Page 829

820 Matrix PRASAR UCS System Manual
The Ring Text is sent in the Alert-INFO field of the INVITE message and the corresponding Ring Type is played on
terminal registered as the SIP Extension, if the terminal supports Distinctive Rings.
The Ring Text is configurable. You can change the Ring Text, if required.
How to configure
At the time of installation, when you select the “Configuring ‘Region’” (as per the geographical location of the
system), and set the system to default, PRASAR UCS loads the country-specific Distinctive Ring Type defined for
the selected Region.
Refer the topic “Default Settings” for the default Distinctive Ring Type applied to your country/region.
However, if required, you can change the default Ring Pattern and the Ring Text (for SIP Extensions) loaded by the
system.
When you change the Ring Texts for the Ring Types in PRASAR UCS, you must configure the same Ring Text in
the SIP phones.
Programming Distinctive Rings using Jeeves
• Login as System Engineer.
• Under Configuration, click System Parameters
.
• Click Distinctive Rings to expand.
• Select the desired Ring Pattern (Ring Type) for each call event that you want to customize.
• You can also customize the Ring Text of each call event on SIP extensions. The text can be a maximum of
20 alphanumerical characters.
• Click Submit.