834 Matrix PRASAR UCS System Manual
Retain the default template, if you want to allow this feature to all extensions and keep the Decrement Timer
disabled.
If you want to deny Dynamic Lock to all extension, simply disable this feature in the default COS group 01 of Station
Basic Feature Template 01.
If you want to allow Dynamic Lock and/or the Decrement Dynamic Lock Timer for Internal Calls only to selected
extensions, then follow these steps:
a. Define a new CoS group with Dynamic Lock and the Decrement Dynamic Lock Timer for Internal Calls
enabled.
b. Prepare a Station Basic Feature Template with this CoS group applicable in all the time zones.
c. Assign this newly prepared Template to the extension on which 'Dynamic Lock' and 'Decrement Dynamic
Lock Timer’ for Internal Call is to be allowed.
Similarly, if you want to deny Dynamic Lock/Decrement Dynamic Lock Timer to selected extension, prepare a new
Template with this feature disabled in the CoS group. Assign this feature to those extensions which are to be
denied this feature.
Refer the topics “Class of Service (COS)” and “Station Basic Feature Template” for programming instructions.
Toll Control Levels in Station Basic Feature Template
Program the Toll Control Levels in the Station Basic Feature Template that are assigned to the extensions which
are to be allowed the Dynamic Lock feature. Refer the topic “Toll Control” for instructions.
How to use
Dynamic Lock, Manual and Automatic, can be set by extension users as well as from their own extensions or from
the SA mode by the Operator.
The extension user/Operator must first set the Dynamic Lock Timer and then change the Dynamic Lock Level.
To set Dynamic Lock-Manual, the extension user/Operation must set the Dynamic Lock Timer to 00.
Recall that
• When the Dynamic Lock-Manual is set (Timer set to 00), the extension user/Operator must dial the
feature access code to restore the previous Toll Control Level.
• When Dynamic Lock-Automatic is set (Timer set to desired number of minutes), the system will restore
the previous Toll Control Level at the end of the Timer.
• The extension user must change the default User Password to be able to set the Dynamic Lock on his/
her extension. Refer the topic “User Password” for instructions on changing the password.
To Next Page
Loading...