836 Matrix PRASAR UCS System Manual
• Toll Control Level 0
• Toll Control Level 1
• Toll Control Level 2
• Toll Control Level 3
• Press Enter key.
• You get the text message 'OK!' and a confirmation tone.
If you are still working with the default User Password, the system will prompt you to 'Change User
Password' when you attempt to set Dynamic Lock. Change your User Password first, before you use this
feature.
Changing Toll Control Level for an Extension (SA mode)
For Extended IP Phone Users
To set Dynamic Lock-Manual:
• Press DSS key assigned to Dynamic Lock.
OR
• Enter Phone Menu.
• You get a text message 'Enter Room/Phone Number'.
• Enter the extension number for which you want to set Dynamic Lock.
• Select the option 'Change Lock Timer'.
• You get the following prompt: 'XX Minutes'.
• Enter 00
• You get the text message <Lock Timer = 00 Minutes> and confirmation tone.
To set Dynamic Lock-Automatic:
• Press DSS key assigned to Dynamic Lock.
OR
• Enter Phone Menu.
• You get a text message 'Enter Room/Phone Number'.
• Enter the extension number for which you want to set Dynamic Lock.
• Select the option 'Change Lock Timer'.
• You get the following prompt: 'XX Minutes'.
• Enter the desired number of minutes (max. 99)
• You get the text message <Lock Timer = xx Minutes> and confirmation tone.
To set Dynamic Lock Level:
• Press DSS key assigned to Dynamic Lock.
OR
• Enter Phone Menu.
• You get a text message 'Enter Room/Phone Number'.
• Enter the extension number for which you want to set Dynamic Lock.
To Next Page
Loading...