Matrix PRASAR UCS System Manual 857
Navigating the Phone Menu
To navigate the menu,
• Tap on Enter key when the phone is idle.
• Scroll by tapping the Up/Down Navigation Key to reach the desired Menu option.
• Tap on Enter key to select the desired Menu option.
• Scroll by tapping on the Up/Down Navigation Key to reach the desired sub-menu option.
• Tap on Enter key to select the desired sub-menu option.
To exit menu,
• Press Cancel key.
Or
• Go ON-Hook.
Call Waiting Indication
During an on-going call, if there is another incoming call, an indication will be provided to you for the waiting call.
The call waiting indication depends on the Call Waiting Tone (for SPARSH VP248/VP310/VP510) option you
select in General Parameters under SIP Extensions. See “Configuring Matrix SPARSH VP248” for instructions.
Connecting SPARSH VP248
For detailed instructions to connect SPARSH VP248, see “Connecting SPARSH VP248 as Extended SIP
Extension” in SIP Extensions.
Configuring SPARSH VP248
For detailed instructions on how to configure SPARSH VP248, see “Configuring Matrix SPARSH VP248”.
Operating SPARSH VP248
Please refer the EON48_310_SPARSH VP248_310 User Guide for instructions on operating the features of
PRASAR UCS.
Phone Settings To customize settings of the phone such as Speech and Ringer Controls, LCD Display
settings (Brightness and Contrast, Backlight ON/OFF), Headset Connectivity, Call
Answering Mode (manual/auto answer).
Menu option Description
To Next Page
Loading...