Matrix PRASAR UCS - Page 874

Matrix PRASAR UCS System Manual 865
When the phone is in idle state,
• Press the Down key to access the Network Settings.
• Press the Up key , if you wish to change the Ringtone and Play Key Tone.
Navigating the Phone Menu
To navigate the menu,
• Press on Enter key when the phone is idle.
• Scroll by tapping the Up/Down Navigation Key to reach the desired Menu option.
• Press on Enter key to select the desired Menu option.
• Scroll by tapping on the Up/Down Navigation Key to reach the desired sub-menu option.
• Press on Enter key to select the desired sub-menu option.
To exit menu,
• Press Cancel key.
Or
• Go ON-Hook.
Call Waiting Indication
During an on-going call, if there is another incoming call, an indication will be provided to you for the waiting call.
The call waiting indication depends on the Call Waiting Tone (for SPARSH VP248/VP310/VP510) option you
select in General Parameters under SIP Extensions. See “Configuring Matrix SPARSH VP310” for instructions.
Connecting SPARSH VP310
For detailed instructions to connect SPARSH VP310, see “Connecting SPARSH VP310 as Extended SIP
Extension” in SIP Extensions.
Do Not Disturb To set/cancel Do Not Disturb on the phone, i.e. block incoming internal and external
calls.
Call Cost Display To view the cost of calls made from the phone.
Hotline To set/cancel Hotline and Delayed Hotline.
Alarm To set/cancel Personalized and Automated Alarms.
Change User
Password
To change User Password.
One Touch Transfer To set/clear Transfer Number.
Phone Settings To customize settings of the phone such as Speech and Ringer Controls, LCD Display
settings (Brightness and Contrast, Backlight ON/OFF), Headset Connectivity, Call
Answering Mode (manual/auto answer).
Menu option Description