884 Matrix PRASAR UCS System Manual
LED Indications
Power Indicator LED
Camera Indicator LED
13
Hookswitch Tab
Secures the handset in the handset cradle when the IP Phone
is mounted vertically.
14
Hookswitch
Picking up the handset from the handset cradle, the hookswitch
bounces and the phone connects to the line.
Laying the handset down on the handset cradle, the phone
disconnects from the line.
15
Camera Lens
2 Mega-pixel camera. Provides near-site video. The better
distance between camera and images you want to capture
should be in the range of 0.35 meters (1 foot) to 2 meters (6
feet).
16
Camera Indicator LED Indicates the status of camera and video calls.
17
Shutter Switch
Covers and uncovers the camera. When the camera is
switched off, the video image is black.
18
USB2.0 Port
Allows you to connect the USB flash drive/USB headset to the
phone.
LED Status Description
Solid Red When the Phone is not registered.
Fast Flashing Red When the Phone is in ringing state.
Slow Flashing Red When the Phone receives a missed call, message or voice mail.
Off
When the Phone is powered off.
When the Phone is in busy state.
When the Phone is idle.
When the call is placed on hold.
When the call is muted.
LED Status Description
Solid Green
When the Phone is powered on and the camera is connected
properly.
When the camera is idle.
When the phone receives an audio call.
Solid Red
When the Phone receives a video call.
When there is an active video call.
When the video call is muted.
When the video call is placed on hold.
Off
When the Phone is powered off.
When the camera is not connected properly.
When the camera shutter switch is closed.
Key Label Item Description
To Next Page
Loading...