Matrix PRASAR UCS System Manual 903
• Now, apply the Station Advanced Feature Templates (with floor service routing groups programmed) to the
extensions of the respective floors. For example: Template number 02 on extensions 2001 to 2010 are on
the first floor, Template number 03 on extensions, 2011 to 2020 on the second floor, and Template number
04 on extensions 3001 to 3010 on the third floor.
If extensions are SIP Extensions, assign the Template on the SIP Extensions Settings page.
If extensions are Virtual Extensions, assign the Template on the Virtual Extensions page.
Refer the topic “Station Advanced Feature Template” for instructions.
How to use
To be able to use floor service, extension users may dial the default Access Code defined for Floor Service: 38.
Check with your System Engineer if this access code has been changed and dial the new access code
obtained from the System Engineer.
For Extended IP Phone Users
• Go OFF-Hook.
• Press DSS Key assigned to Floor Service (if programmed)
OR
• Dial Access Code '38'
•Talk
• Go ON-Hook
To Next Page
Loading...