Matrix PRASAR UCS System Manual 923
Now, program these parameters:
• Enable Incoming CLI Modification: Enable this check box if you want to use the Incoming CLI
Modification feature. By default, this check box is disabled.
If you receive CLI in dial-able format, there is no need to use this feature. In such case, keep the check box
disabled. You do not need to configure any of the CLI modification parameters.
• Country Code: Enter the Country Code of the country where PRASAR UCS is installed. The Country
Code helps PRASAR UCS detect whether the Incoming CLI received is a national or an international
number. Do not enter any prefix for the Country Code. By default it is Blank.
•Area Code: Enter the Area Code of the place where the PRASAR UCS is installed. The Area Code helps
PRASAR UCS detect whether the Incoming CLI received is a local number. Do not enter any prefix for the
Area Code. By default it is Blank.
• International Prefix: Enter the digits that are required as Prefix for dialing International Numbers. The
prefix may be up to 5 digits, with numbers from 00000 to 99999. By default it is Blank.
• National Prefix: Enter the digits that are required as Prefix for dialing long distance, National (within the
country) numbers. The prefix may be up to 5 digits, with numbers from 00000 to 99999. By default it is
Blank.
• Area Code required to make local calls?: Depending on the dialing pattern of your local public
telephone network, you may choose from the following options:
• No (Area Code not required): select this option if your public telephone network does not require the
dialing of Area Code for local numbers.
• Yes (Area Code is required): select this option if your public telephone network requires you to dial
the Area Code for local numbers.
• Yes (Area Code with Prefix required): select this option if you public telephone network requires you
to dial Area Code with a particular Prefix for local numbers. If you select this option, you must also
program the Prefix digits for the Area Code.
By default, the option, ‘No (Area Code not required) is selected.
To Next Page
Loading...