Matrix PRASAR UCS - Page 974

Matrix PRASAR UCS System Manual 965
Control level is to be configured in the “Station Basic Feature Template” assigned to the Mobility
Extensions.
• Configure the parameter ‘Allow External Call Forward for' in the “Station Advanced Feature Template”
assigned to the Mobility Extensions. This parameter defines the types of call for which the External Call
Forwarding is to be applied. Select any one of the options, Internal Calls Only, Trunk Calls Only, Internal +
Trunk Calls as required.
• Configure the parameter 'DISA' in the “Trunk Feature Template” of the trunk lines which Mobility
Extensions users are to be provided access to. Make sure you select the option 'CLI Auth.- Multiple Calls'
in the 'DISA' parameter of the 'Trunk Feature Template'.
• Make a list of numbers which the Mobility Extension users will use to access the PRASAR UCS from DISA
mode. Configure this list of numbers in the "DISA - CLI Authentication Table".
Configure this list of numbers in the 'Calling Number' field of the Authentication Table. Configure the 'Port
Type' and 'Port Number' of the Extension assigned to Mobility Extension Users in the 'Auto Login As' for
the respective 'Calling Number' field. Refer the topic “Direct Inward System Access (DISA)” to know more.
How to use
The Mobility Extension Users of PRASAR UCS can use the features of PRASAR UCS from a remote location as
described below.
Receiving calls
To receive calls, the Mobility Extension User must set Call Forward on his extension with an external number
(mobile number, landline number, etc.) as the destination number.
To make calls ring on the extension and the external number simultaneously, the Mobility Extension User must
activate the Call Forward-Dual Ring feature on his extension.
The Mobility Extension User can also choose where he wants to receive the calls during a particular time of the day.
For example, he can receive calls during a particular time of the day, that is, Time Zone on his external number and
have his calls received by his Voice mail or the Operator or any other number during another Time Zone. To do this,
he must set “Call Forward-Scheduled" on his extension. Dual Ring can also be set for Call Forward-Scheduled.
Making calls
The Mobility Extension User should make a call on the DISA enabled trunk of PRASAR UCS from the external
number and the system will provide the dial tone to the user after authenticating the external number with the help
of the DISA-CLI Authentication table.
On getting the dial tone, the Mobility Extension User can make internal as well as external calls as per the “Toll
Control” and “Class of Service (COS)” assigned to his Extension.
The Mobility Extension User can also dial codes of the Personal directory and Global directory numbers to use the
feature Abbreviated Dialing.
Accessing Features