968 Matrix PRASAR UCS System Manual
To pick up the selective call,
• Make a call on DISA enabled Trunk from Mobility Extension User.
• After receiving dial tone, dial 12-Station Number.
• The call ringing on the dialed station of will get connected with Mobility Extension User.
3-Party Conference
To conduct a 3-Party Conference,
• Make the first call.
•Dial #2.
• Make the second call.
•Dial #2-*3 to establish conference.
Multiparty Conference
To create a Multiparty Conference,
• Mobility Extension User has generated three-party conference with B and C.
•Dial #2 from Mobility Extension user.
• Dial number of Party D.
• After speech, dial #2-*3.
• Mobility Extension User, B, C and D are in Multi-party Conference.
• Dial number of Party E.
•Dial #2 from Mobility Extension user.
• After speech, dial #2-*3.
• Mobility Extension User, B, C, D and E are in Multi-party Conference.
•Dial #2 from Mobility Extension user.
• Dial number of Party F.
• After speech, dial #2-*3.
• Mobility Extension User, B, C, D, E and F are in Multi-party Conference.
• All Parties will get connected with each other.
To terminate the Multiparty Conference,
• When in the middle of a Multiparty Conference,
•Dial #2.
•Dial 190 after getting feature tone.
To temporarily leave the Multiparty Conference,
• When in the middle of a Multiparty Conference,
•Dial #2.
•Dial 191 after getting feature tone.
To rejoin the Multiparty Conference,
•Dial #1 to go Off Hook.
•Dial 191.
To permanently leave the Multiparty Conference,
• While in multi-party conference, dial #0 to go Off Hook.
To Next Page
Loading...