7. MODIFYING MEASUREMENT CONDITIONS
No. 99MBB122A
7-31
4 Select a save number with the [ ↑ ] [ ↓ ] keys, and press the
[Enter/Menu] key.
5 Enter a name for the measurement conditions file.
TIP
• A name is automatically generated and displayed, but it
can be changed as required. The name can consist of
alphanumeric characters, “-” (hyphen), and “_”
(underscore). Up to 8 characters can be used.
• The name is cleared when the “AC” ([Blue] key) is pressed.
• For information about character entry, refer to 2.5,
“Entering Numeric Values/Characters”.
6 Press the [Enter/Menu] key.
The measurement conditions are saved to the internal memory.
TIP
• Press the [Esc/Guide] key to return to the previous screen.
Save New screen
Internal Memory Save screen
Internal Memory Save screen
To Next Page
Loading...
