No. 99MBB122A
7-32
■ Operating procedure (saving to the memory card) (Refer to “■ Accessing the Measurement Conditions
screen” in Section 7.1.)
Home screen to Main Menu
1 Set the measurement conditions.
2 On the Measurement Conditions screen, press the “Save” ([Red] key).
3 Select “Memory Card” with the [ ↑ ] [ ↓ ] keys, and press the
[Enter/Menu] key.
4 Select “Save New” with the [ ↑ ] [ ↓ ] keys, and press the [Enter/Menu]
key.
TIP
• When overwriting measurement conditions on the memory
card, select the measurement conditions and press the
[Enter/Menu] key. Press the [Enter/Menu] key when the
message is displayed on the screen.
• By searching for measurement conditions to overwrite, you
can narrow down applicable conditions. To search, press
the “Search” ([Red] key) and enter a keyword. When the
[Enter/Menu] key is pressed, measurement conditions that
include the keyword are displayed.
Measurement Conditions screen
Measurement Condition
Save Location screen
Memory Card Save screen
To Next Page
Loading...
