Mitutoyo SJ-210 - Page 167

No. 99MBB122A
8-4
■ Parameters and roughness standards/evaluation profiles
Parameters can be selected and saved for each roughness standard and evaluation profile.
When a roughness standard or evaluation profile is set, predetermined parameters are
recalled.
Roughness
standard
Evaluation
profile
Parameter
P Rz, Rmax JIS1982
R Ra
JIS1994 R Ra, Rz, Ry, Pc, Sm, S, mr(c)
P Pa, Pq, Pz, Pp, Pv, Pt, Psk, Pku, Pc, PSm, PzJIS, PΔq, Pmr, Pmr(c), Pδc,
Rk, Rpk, Rvk, Mr1, Mr2, A1, A2
R Ra, Rq, Rz, Rp, Rv, Rt, Rsk, Rku, Rc, RSm, RzJIS, RΔq, Rmr, Rmr(c),
Rδc, Rk, Rpk, Rvk, Mr1, Mr2, A1, A2
DF Ra, Rq, Rz, Rp, Rv, Rt, Rsk, Rku, Rc, RSm, RzJIS, RΔq, Rmr, Rmr(c),
Rδc, Rk, Rpk, Rvk, Mr1, Mr2, A1, A2
JIS2001
R-Motif R, Rx, AR
P Pa, Pq, Pz, Pp, Pv, Pt, Psk, Pku, Pc, PSm, Pz1max, PΔq, Pmr, Pmr(c),
Pδc, Rk, Rpk, Rvk, Mr1, Mr2, A1, A2
R Ra, Rq, Rz, Rp, Rv, Rt, Rsk, Rku, Rc, RSm, Rz1max, RΔq, Rmr, Rmr(c),
Rδc, Rk, Rpk, Rvk, Mr1, Mr2, A1, A2
DF Ra, Rq, Rz, Rp, Rv, Rt, Rsk, Rku, Rc, RSm, Rz1max, RΔq, Rmr, Rmr(c),
Rδc, Rk, Rpk, Rvk, Mr1, Mr2, A1, A2
R-Motif R, Rx, AR
ISO1997
W-Motif W, Wx, AW, Wte
ANSI R Ra, Rq, Rz, Rp, Rv, Rt, Rsk, Rku, RPc, RSm, Rmax, RΔa, RΔq, tp, Htp,
Rpm
P Pa, Pq, Pz, Pp, Pv, Pt, Psk, Pku, Pc, PSm, Pmax, PΔq, Pmr, Pmr(c), Pδc,
Rk, Rpk, Rvk, Mr1, Mr2, A1, A2
R Ra, Rq, Rz, Rp, Rv, Rt, Rsk, Rku, Rc, RSm, Rmax, RΔq, Rmr, Rmr(c),
Rδc, Rk, Rpk, Rvk, Mr1, Mr2, A1, A2
VDA
DF Ra, Rq, Rz, Rp, Rv, Rt, Rsk, Rku, Rc, RSm, Rmax, RΔq, Rmr, Rmr(c),
Rδc, Rk, Rpk, Rvk, Mr1, Mr2, A1, A2