Mitutoyo SJ-210 - Page 168

8. MODIFYING PARAMETERS
No. 99MBB122A
8-5
Roughness
standard
Evaluation
profile
Parameter
P Pa, Pq, Pz, Py, Pp, Pv, Pt, P3z, Psk, Pku, Pc, PPc, PSm, S, HSC, PzJIS,
Pppi, PΔa, PΔq, Plr, Pmr, Pmr(c), Pδc, Rk, Rpk, Rvk, Mr1, Mr2, A1, A2, Vo,
Ppm
R Ra, Rq, Rz, Ry, Rp, Rv, Rt, R3z, Rsk, Rku, Rc, RPc, RSm, S, HSC, RzJIS,
Rppi, RΔa, RΔq, Rlr, Rmr, Rmr(c), Rδc, Rk, Rpk, Rvk, Mr1, Mr2, A1, A2,
Vo, Rpm
DF Ra, Rq, Rz, Ry, Rp, Rv, Rt, R3z, Rsk, Rku, Rc, RPc, RSm, S, HSC, RzJIS,
Rppi, RΔa, RΔq, Rlr, Rmr, Rmr(c), Rδc, Rk, Rpk, Rvk, Mr1, Mr2, A1, A2,
Vo, Rpm
Free
R-Motif R, Rx, AR
■ Operating procedure (when individual parameters are selected) (Refer to “■ Accessing the Submenu screen”
in Section 8.1.)
Home screen to Main Menu  
1 Check that the roughness standard and the evaluation profile are
selected for the parameters to be customized.
When the roughness standard or evaluation profile differs, refer to 7.2,
“Modifying the Roughness Standard” or 7.3, “Modifying the Evaluation
Profile”, and change the roughness standard or evaluation profile
accordingly.
2 Set the parameters.
Select the parameter to be calculated and displayed with the [ ↑ ] [ ↓ ]
keys, and press the [Enter/Menu] key.
Parameter Setup screen
Parameter Setup screen