No. 99MBB122A
8-12
3 Set which parameters use GO/NG judgment.
To set GO/NG judgment for each parameter, follow the below
procedure.
a Select a parameter for GO/NG judgment with the [ ↑ ] [ ↓ ] keys, and
press the [Enter/Menu] key.
The name of the set parameter turns red.
b To set the upper limit value, press the “Up Limit” ([Red] key).
GO/NG Judgment Rule
Setup screen
GO/NG Judgment Rule
Setup screen
GO/NG Judgment Rule
Setup screen
To Next Page
Loading...
