No. 99MBB122A
8-22
b Press the [Enter/Menu] key to set the number of sections.
Pressing the [Enter/Menu] key cycles through the available settings
from “1” to “12”.
4 Set the reference line.
a Select “Reference Line” with the [ ↑ ] [ ↓ ] keys, and press the
[Enter/Menu] key.
b Input the reference line.
The input range is as follows:
0.0 to 99.9 %
TIP
• The value is set to 0 when the “AC” ([Blue] key) is pressed.
• For information about numeric value entry, refer to 2.5,
“Entering Numeric Values/Characters”.
c Press the [Enter/Menu] key.
The set reference line is displayed on the mr Setup screen.
mr Setup screen
Reference Line Setup screen
mr Setup screen
mr Setup screen
To Next Page
Loading...
