8. MODIFYING PARAMETERS
No. 99MBB122A
8-23
5 Set the slice depth.
a Select “Slice depth” with the [ ↑ ] [ ↓ ] keys, and press the
[Enter/Menu] key.
b Input the slice depth.
The input range is as follows:
0.0 to 999.9 m (9999.99 in)
TIP
• The value is set to 0 when the “AC” ([Blue] key) is pressed.
• For information about numeric value entry, refer to 2.5,
“Entering Numeric Values/Characters”.
c Press the [Enter/Menu] key.
The set slice depth is displayed on the mr Setup screen.
TIP
• Press the [Esc/Guide] key to return to the previous screen.
• The screen returns to the Home screen when the “Home”
([Blue] key) is pressed.
Slice Depth Setup screen
mr Setup screen
mr Setup screen
To Next Page
Loading...
